Description of the quality of cuts in use | Qualitative degree | Basic characteristics | Roughness Ra* in upper contour | Roughness Ra* in lower contour | Geometric accuracy (mm)* in upper contour | Geometric accuracy (mm)* in lower contour | Bevel | | Q5 | Best cut | below 3.2 | approx. 3.2 | +/- 0,1 | +/- 0,1 | Mostly moderate cuts | | Q4 | Quality cut | approx. 3.2 | approx. 6.3 | +/- 0,1 | +/- 0,2 | Mostly at a minimum | | Q3 | Medium cut | approx. 4.0 | to 12.5 | +/- 0,15 | According to type and strength of material | According to type and strength of material | | Q2 | Rough cut | approx. 4.0 | to 25 | +/- 0,2 | According to type and strength of material | According to type and strength of material | | Q1 | Dividing cut | 4,0-6,3 | to 40 | +/- 0,2 | Highly inaccurate | Large bevel to + | (*) Values are only for orientation and can vary according to the type material The quality of the cut depends on the speed of cutting, as well as the type and thickness of the material
Examples of cut
Example of quality cut Q2 | Example of quality cut Q4 |
How much does cutting 1 opening cost, 1 m cut...? | The price for cutting depends on: | - Type and thickness of material
- Requested quality of the cut
- Complexity of the cut form
- Batch orders and total volume of order
- Operational demands
- Use of underlying material, etc.
|
In view of the amount of possible factors for forming costs, it is not possible to provide an objective price list. We calculate the price for each order individually (based on request and options, e.g., for various qualities of cut, for various batch productions, including material and without it, etc.) Orders - if possible, they should come with the exact specification of the above-mentioned parameters - via telephone, fax, by post and even electronic post. We handle all orders immediately and we would be happy to welcome you in our office or come to visit you personally. | | You can find electronical form for your demand right here. ^ Up
|
